1 / 2
10x4mm magnet mounts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Simple flat and 90 degree mounts to fit magnets like https://www.gotmagnets.co.uk/product/d-10-x-4-mm-n35-neodymium-magnets/ onto wooden panels. Countersunk slots for small wood screws. Magnets should push fit into place but can be glued if required. Print in something like PETG with a degree of elasticity, PLA is probably too brittle and you'll probably snap things getting the magnets in. Designed to work with a 0.6mm nozzle but should be fine with other sizes.
Best printed with the hole for the magnet in the top surface.