Smoother Cable Chain / Spine for SOVOL SV06 with scaled ball joint
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of cable chain for Sovol SV06, with the ball part of the mesh scaled to 99% for smoother fit.
- Rating
- 5 / 5
- Likes
- 81
- Downloads
- 778
- Makes
- 14
- Views
- 3,659
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the excellent cable chain for the Sovol SV06 made by rogerquin (https://www.printables.com/model/447467-cable-chain-spine-for-sovol-sv06-3d-printer-extrud).
To make the chain flex smoothly, I used blender to scale down the ball (male) part of the mesh. Did not need to post-process with heat or grease, just snap together and go.
Recommend using the 99% file. Printed with PLA, 0.2mm layer height, 2 or 3 perimeters, 10-20% infill, no support. Also used 1mm brim but that's probably optional. I included files for 98% and 100% as well.
I printed about 24 of them in total for the ribbon. Copy & paste in your slicer to print multiple at the same time.
On my setup I'm using the motherbox end remixed by PhantomAura (https://www.printables.com/model/566847-sovol-sv06sv06-plus-cable-chain-motherboard-link) and no extruder end. By request I included scaled versions of the two extruder end parts.
