Smoother Cable Chain / Spine for SOVOL SV06 with scaled ball joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of cable chain for Sovol SV06, with the ball part of the mesh scaled to 99% for smoother fit.
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 778
- Wydruki
- 14
- Wyświetlenia
- 3659
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the excellent cable chain for the Sovol SV06 made by rogerquin (https://www.printables.com/model/447467-cable-chain-spine-for-sovol-sv06-3d-printer-extrud).
To make the chain flex smoothly, I used blender to scale down the ball (male) part of the mesh. Did not need to post-process with heat or grease, just snap together and go.
Recommend using the 99% file. Printed with PLA, 0.2mm layer height, 2 or 3 perimeters, 10-20% infill, no support. Also used 1mm brim but that's probably optional. I included files for 98% and 100% as well.
I printed about 24 of them in total for the ribbon. Copy & paste in your slicer to print multiple at the same time.
On my setup I'm using the motherbox end remixed by PhantomAura (https://www.printables.com/model/566847-sovol-sv06sv06-plus-cable-chain-motherboard-link) and no extruder end. By request I included scaled versions of the two extruder end parts.