1 / 2
OK Trophy with eyes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a few changes. Most noticeably I added eyes and mouth as a separate part. So you won't have to suffer painting it.
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 287
- Makes
- 5
- Views
- 1,068
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I got asked by @Keen_Edge_1017448 to make a remix so here it goes. @Keen_Edge_1017448 I am doing this for you!
- Use original hat and nameplate.
- I removed all gaps from the base. Those gaps bothered me immensely. Now both legs and nameplate should be a tight fit now and require no glue. If you are not okay with that - use the original base.
- The insert part definitely requires a brim. In case of body_main use brim at your own discretion.
- Use snug supports for eye and mouth holes. Use your x-acto knife for cleanup if needed.
- I printed everything at 62.5% scale with 0.25 nozzle and experienced no problems during the assembly. I assume printing at 100% with 0.4 nozzle should be just as smooth.