Slat Doorbell Chime Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement cover for my old flush mounted doorbell chime, along with spacer.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 219
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement cover for my doorbell chime, along with spacer.
I have a very old doorbell that's flush mounted with the wall - old enough that I'm unclear what brand or model it might be. I am attempting to attach an adapter to it for use with my new video doorbell, however I couldn't find a good place to put the adapter due to the aforementioned flush mount. So, here's a simple and boring doorbell chime cover with a small spacer!
It's printed in two parts so you don't have to worry about supports, and this way of course you could use it as a flush mount replacement if needed.
Dimensions are as follows:
- 187mm x 138mm, and the spacer is 10mm deep
- Screw holes are 5mm in diameter, and center to center 152mm apart