1 / 8
Sony WH-1000XM5 Headphones Broken Slider Fix — image 1
1 / 8

Sony WH-1000XM5 Headphones Broken Slider Fix

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I designed this when the slider of my WH-1000XM5 Headphones broke and it clamps onto the bearing and slider.

Rating
5 / 5
Likes
33
Downloads
507
Makes
2
Views
3,709
Reviews
1

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial — Share Alike

You will need a screw where the thread is M3 and 8mm long and an M3 nuts. You will need to push the wires through the gap in the print and the make sure the thicker part (bottom) is clamping onto the bearing and the slimmer part is clamping onto the slider. Then you will need to align the earcups and finally. put the screw in and the nuts on the outer side and tighten with a screwdriver and you are set. 

Print without supports. 

Tags