1 / 3
Cable management vhb hook loops - easy to print and use on any surface. — image 1
1 / 3

Cable management vhb hook loops - easy to print and use on any surface.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Designed to be used used with standard roll of VHB tape (25.4mm / 1in wide). Mount them in any direction.

Rating
0 / 5
Likes
6
Downloads
48
Makes
0
Views
273
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

Why and what for.

Can be used for cable management or to hang something. Designed to be printed in stacks and used with standard VHB roll (25.4mm / 1in wide). 

If you like the idea

  • Hit ❤ like, leave a comment, post a pic of the print, upload a Make.
  • It does motivates me to share more of my projects.

Print settings

Stacked models have one layer gap (0.2mm) in between- your slicer might freak out - but don't let it. It is made for easy parts separation.

  • Material - depends on application. PLA/PETG/ASA/ABS.
  • Layer height - 0.2mm - IMPORTANT.
  • Supports - not needed.
  • Cooling - if printing hot - stacked parts might need some cooling for the first layer of the top part.
  • Parts orientation - included.

Additional parts

Some VHB tape or similar. Made 25.4mm / 1in wide roll.

Additional Information

Included sizes
SizeQTYWall thicknessInside DiameterApplication
52mm2 - Side by Side4mm20mmHeavy Duty
52mm1 - Single4mm20mmHeavy Duty
52mm4 - Side by Side - Stacked4mm20mmMedium Duty
52mm2  - Side by Side - Stacked4mm20mmMedium Duty
26mm4 - Side by Side - Stacked2mm10mmMedium Duty
26mm2 - Side by Side - Stacked2mm10mmMedium Duty
13mm4 - Side by Side - Stacked2mm4.5mmHeavy Duty
13mm2 - Side by Side - Stacked2mm4.5mmHeavy Duty
13mm4 - Side by Side - Stacked1.2mm5.2mmLight Duty
13mm2 - Side by Side - Stacked1.2mm5.2mmLight Duty

 

Follow pictures below for assembly instructions.

Tags