Counting matching models…
I enlarged the bottom to have better stick with 3M VHB tape. Quite firm on my ceramic tile in kitchen and bathroom. You can use two 40mm wide 3M VHB double sided tape.
I really liked the original model but I didn't want to drill holes in my doors, so remixed them to use VHB tape. I've also used higher pin heights on the lower hinges to make putting the doors on easier. Hardware wise you just need: 4 x…
The excellent locking cable clip by @bequ3 was missing a mounting base for 3M VHB tape, which is my favorite for mounting things screwless. I thought some other people might need it too, so I have shared it for your convenience.
Pieces to adapt the the honeycomb storage wall that allow you to mount to the side of an X1C. Here is the tape that I used: https://www.amazon.com/gp/product/B08T1HB5LJ
Original model fit well with the Hue LED strip, however as I'm using VHB tape did not need the tab for countersunk screw
This model was shared with me as a nice way to hang your Baofeng radios, or more specifically for me, your Meshtastic devices that have Baofeng clips (like those from https://www.printables.com/@AlleyCat) from the dash of your vehicle. I…
I upgraded my camera for my Mendel90 (Octoprint). For mounting i used 3M VHB Tape You need: 3M VHB or some screw to mount 2x M3 Self Lock nut 1xM3x15mm (or longer) 2x M3x11mm (or longer) Please upload a photo of your make. This design is…
3M VHB Tape Mount for Resqme Seatbelt Cutter and Glass Breaker A 3M VHB tape mount for storing the Resqme seatbelt cutter and glass breaker in your vehicle. This will keep this valuable escape tool close to hand in the event you ever need…
I remixed the original kitchen towel holder so that it doesn't require any screws. All parts printed with 3 perimeters at 20% infill. Print Settings Rafts: No Supports: No Category: Kitchen & Dining
This part is missing for some reason from the multiboard.io site, so I built it from the default offset snaps. It has the same offset as the other VHB tape mounts (which is different from those using screws) and has the holes removed for…
I upgraded my camera for my Mendel90 (Octoprint). For mounting i used 3M VHB Tape You need: 3M VHB or some screw to mount 2x M3 Self Lock nut 1xM3x15mm (or longer) 2x M3x11mm (or longer) Please upload a photo of your make. This design is…
Needed to free up some table space so made a remote caddy to hold my 3 remotes. Foam tape ended up failing too fast so I switched to VHB, specifically used this kind of tape: https://www.amazon.com/gp/product/B07K4PQG8P. Still holding up…
Attach a 2020 extrusion to a 2020 extrusion like a roof rack or a VHB mounted something. There is also a 2020 wire guide. All are oriented for printing. These mounts have feet and plug in firmly without even using a bolt and so they are…
Why and what for. Can be used for cable management or to hang something. Designed to be printed in stacks and used with standard VHB roll (25.4mm / 1in wide). If you like the idea Hit ❤ like, leave a comment, post a pic of the print,…
Mount with VHB. Side slots present for easy grip and removal
i thought i'd need to make the base wider for more surface area but turns out it is plenty big enough, i covered the whole surface with pattex double adhesive, i think 3M VHB would work just as well. electric guitar has been attached for…
A mount for @Brody_499227's Bambu Lab P1 X1 Dual Aux Fan ( https://www.printables.com/model/435312-bambu-lab-p1-x1-dual-aux-fan-725-updated ) that attaches to the side of the P1S using 2.5cm VHB tape. The mount uses the longer screws…
This has a 5mm ID for the frame side of the hinge.
I was looking for a solution to organize the Bowden tubes at the back of my Voron printers to feed the ERCF system. My goal was to keep the tubes neatly arranged and securely mounted to the 2020 profiles, the panels, and my shelf. To…
I printed in ASA right side up and was fine.
PRINTING SETTINGS Material: ASA / ABS Layer height: 0.2 mm Infyll type: Grid, Gyroid, Honeycomb, Triangle or Cubic Infyll percentage: 40% Wall count: 4 Solid TOP/BOTTON layers: 5 BOM 2 x M3x10 BHCS Github:…
Want a simple strong hook you can mount with VHB tape? Look no further, depending on the size it can hold 1 to 5 pounds. According to the math of the VHB tape I use. Use at your own risk. Print on side to preserve strength and the inlay…
i used pla. obviously no supports
Quick remix that allows you to use the tilting BTT SPI screen mount with 3M instead of attaching it via extrusions.
I designed a custom 3d printed mount for a replacement battery from vhbw for Sony's dualshock 3 controller. Fits VX3.0 and VX5.0 controller revisions (and possibly others, couldn't test that). Printed in PLA with 0.15 layer height…
made this to be able to mount a power strip to the wall using the screw holes on the back without having to drill holes in the wall, mounts with 25mm VHB tape and allows the power strip to still be easily removable
Recommendations: 0.2 mm layer height PETG, PC, or other structurally sturdy filament
I needed a fan mount to hold a fan next to my control board and could not find one easily. So I whipped one up with parameters that I could use for the 4010 fan I had, at the height I needed, but will also work with 50mm and 60mm fans and…
This is a replacement handle designed to be compatible with Casper brand roll-up screen doors . The original handles clip into a small groove on the screen frame, which tends to become a weak point and eventually break. This version still…
I need an headset holder, i've a 3d printer, i've a VBH tape and i don't want to use screw on my furniture, so why not? VBH can hold a lot of weight! Post a Make if u Print!
Cello's 12V Traveller webOS TVs are everywhere in caravans and motorhomes, but the remote gets no home — it lives on the sofa, the floor, or under the sofa. Searched all the usual sites: holders exist for the old Vesten-style caravan…
I have this one mounted with M3 Tape. Mounds really well. The Peg needs some support for printing, otherwise quite easy.
This is a remix of the Bento Box Mini V0.2 bottom cradle , replacing the extrusion tab with a flat plate for VHB tape mounting to any flat surface. I designed this to mount a Bento Mini to my Voron Switchwire deck plate which doen not…
I created this one to hold a lan cable.
Simple mod, took the original VHB DIN mount of the Voron 0 project and made it 50mm wide, to allow mounting SSR, Wago blocks etc, which wouldn't fit on the stock DIN mount. Make sure the side which will accept the VHB tape (the one with…
Created these to hold my fairy lights on the balcony.
The FJX7 is a cracking bit of kit, but the remote holder it ships with is nasty imo and rattles. It's the only way to control the aircon, and it spends its life migrating between the worktop, the bed and the floor of the van — usually…
Couldn't drill holes in my wall and needed a shelf there, so i designed this simple bracket to hold it. It's made to be held with double sided tape. It's supposed to be used on both ends of the shelf. Tape wouldn't hold very well with the…
Use this adapter plate and VHB tape to add a cold shoe to the back of your monitor or PC case, dash board, or any other flat surface. This mounting plate uses the SmallRig's locating-pin spacing to prevent the cold shoe from rotating…
I designed one 7 years ago, but that was very basic and friction mounted. Now with the magic 3M VHB double-sided tape, you can mount it on your desk without any damage. Need to remove it? Just twist the base, VHB does not like twisting…
VHB Holder - Holds one Spool of 3M VHB - 18 cm diameter
I have no door on my printer room as I store my climbing/camping/snow gear in there and its a pain with large items. Anyway, the lights and noise annoy me at night. I got a sound dampening blanket, lined with grommets. Rather than…
i used pla. obviously no supports
Couldn't drill holes in my wall and needed a shelf there, so i designed this simple bracket to hold it. It's made to be held with double sided tape. It's supposed to be used on both ends of the shelf. Tape wouldn't hold very well with the…
I have this one mounted with M3 Tape. Mounds really well. The Peg needs some support for printing, otherwise quite easy.
This is a remix of the Bento Box Mini V0.2 bottom cradle , replacing the extrusion tab with a flat plate for VHB tape mounting to any flat surface. I designed this to mount a Bento Mini to my Voron Switchwire deck plate which doen not…
This part is missing for some reason from the multiboard.io site, so I built it from the default offset snaps. It has the same offset as the other VHB tape mounts (which is different from those using screws) and has the holes removed for…
