VHB Mount for Bento Mini
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the bottom cradle for the Bento Mini to use VHB tape for mounting.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of the Bento Box Mini V0.2 bottom cradle, replacing the extrusion tab with a flat plate for VHB tape mounting to any flat surface. I designed this to mount a Bento Mini to my Voron Switchwire deck plate which doen not have an extrusion for attaching.
There are two versions included: one with alignment grooves for 9 short strips of 10mm wide VHB tape and one without.
Print Settings:
Material: ASA/ABS/PETG
Orientation: Back side on bed
Layer height: 0.2mm
Walls: 3
Infill: 40% gyroid
Supports may be needed under the cradle overhang
Hardware:
2 × M3x6mm BHCS
VHB tape