Counting matching models…
This is a display stand for the bento boxes from Awajiya/淡路屋 in Japan. It's not meant to be a model train that can roll around the tracks (despite the wheels do run 😉.) I've had a chance to get all three variants of the JRFreight…
A BentoBox remix that is half snap, half screw. With carbon pads rather then carbon pallets, to keep the mess minimum. Needed Hardware: 8x Din912 M3*10 7x m3 threated insert 2x 4010 fan Hepa filter Carbon pad Print instructions: Print in…
Dont have magnets (yet)? Use those pins to connect the bento boxes. Print with precise wall 20mm layer height more elephant correction (ca 0.25mm)
Box um den Netzteilanschluss und On/Off Schalter für die Bento Box an meinem X1C unterzubringen.
I wanted to mount the Bentobox somewhere in the enclosure on my Ender 3 S1 Pro, so I made this. It doesn't work with the screen mounted, obviously. Printed without supports with 15% infill and 4 walls. Modify as you need to for strength.…
just print it ;-) Add an additional Design with only 15 degree elevation.
Bento cake are known for their good meme and drawing on them with writing like “not your turning 30”, “you're old”, etc. So I made one of the drawing as decoration You can print it with two different colors : the base white, then the top…
Print with supports. Edited in FreeCad. You can edit hole dimensions for any other switch.
Remixed bentobox hepa filter holder for ILIFE T20S A20 v3x filters filer size is 100mm x 46mm
The ridge should hook fairly firmly, but I still taped it to the back just in case. Please use the cover, hepa, and fan case from the original model.
Step into the most delicious corner of the digital kitchen! This collection is packed with bite-sized 3D Japanese treats that look almost good enough to eat! From fluffy rice to sweet snacks, it’s a total feast for your eyes! 🍱💖 What’s on…
Uses two 40x40x20mm two pull air though the HEPA filter and then the activated carbon (acid free!!). Purifies the air significantly. Filter as well as the carbon is very easy to change. The fans I used are 24V and could therfore by…
Some changes to the cable routing for the Kobra S1 and other models. Fan mounting has been modified. Fan housing and air
This is a remix of the Bento Box Mini V0.2 bottom cradle , replacing the extrusion tab with a flat plate for VHB tape mounting to any flat surface. I designed this to mount a Bento Mini to my Voron Switchwire deck plate which doen not…
I really liked the original BentoBox idea, but after building one I wanted something with better airflow and less noise. The original 40 mm fan setup worked, but it was louder than I wanted and did not perform as well as I hoped. So I…
I wanted to have a bento box air filter for my ABS prints inside my Prusa Mini's Lack enclosure that used a PC case fan rather than the smaller ones I found elsewhere. This is my first version of the design, and I am sure it could be…
this is a base for the bento box slim, I used 2 4mm screw to fix it to a Ikea lack enclousure
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
Wanted to hard-wire some bento-boxes with minimal effort so I bought some kits from voxelpla but my OCD couldn't stand the messy wire look or the power block flopping around in the back of the machine so I came up with a quick mount that…
Remixed duct with 2 main modifications: ability to mount on the back of enclosed RatRig V-core 3 (left or right side, mirror model if needed) - use M6x16 cap head screws, instead of M6x12 single cable port duct with conduit for one of the…
This is another remix of Bentobox, but this version using 2x5015 fans to fit on Creality K1. The original version of Bentobox uses 2x4020 axial fan. This fan don't have much static pressure to move air through the filters. Radials fans…
TPU covers to keep your carbon pellets nice when not in use. Printed in 95a tpu.
I wanted a bento box air filter for my printer but couldn't find a suitable place for the original bento box. I also wanted to share parts with my friend who owns a Bambulab. So, I launched Fusion and created a design that could fit into…
Originally, I printed (2) SSX556's BentoBox v2.0 5015 pull-configuration case+shroud carbon filters to use with my Prusa XL printer. This was prior to even having one in my hands. I used them as stand alone filters to aid in cleaning the…
This is a display stand for the bento boxes from Awajiya/淡路屋 in Japan. It's not meant to be a model train that can roll around the tracks (despite the wheels do run 😉.) I've had a chance to get all three variants of the JRFreight…
Came up with the idea while watching my filter wobble back and forth. 3 points of contact by tucking it in the corner.
Uses the same hole spacing as the floor panel. Mounts to the right of the rear rail.
This replaces the original BentoBox duct to fit the Official Prusa MINI Enclosure. Compatible with the rest of the BentoBox v2.0 parts. Printing Print the duct in the default orientation (standing up). Print the mounting plate laying flat…
A BentoBox remix that is half snap, half screw. With carbon pads rather then carbon pallets, to keep the mess minimum. Needed Hardware: 8x Din912 M3*10 7x m3 threated insert 2x 4010 fan Hepa filter Carbon pad Print instructions: Print in…
For use with 4x2 magnets (which you need for building the BentoBox anyway) 2024-10-22: * added holes for more magnets as they are quite weak * increased depth for melt inserts (6mm) to allow usage of longer inserts * added also additional…
little stronger mounting and a hole for a chamber temp thermistor. Used a pair of wagos to connect the fans.
Each model is divided into two parts: a front part and a back part. You can print only the front part if you want to hang it on the wall, or glue the front and back parts together. Place the model at a 45º angle to fit correctly on the…
This model is fully compatible with X1, X1C, X1E, P1S and P1P printers. This model is fully compatible with the original BentoBox V2.0 filter. Easy installation. Use 12V (with buck converter) or 24V blower fans. 5015 and 5020 models…
This is a condensed version of the bottom to have more room for larger carbon filter etc
Props to thrutheframe for his Bentobox air filter, which inspired this work. Shortcake attempts to take the same ideas with optionally identical capacity, and realize them in a smaller space with fewer parts. Ideally, it is now so simple…
Dont have magnets (yet)? Use those pins to connect the bento boxes. Print with precise wall 20mm layer height more elephant correction (ca 0.25mm)
I used magnets with w 3 mm and h 4mm (glue). Rubber band keeps the cover attached to the box.
I recently receive my K2 Plus and wanted to add the BentoBox. The original version does not fit inside, but fortunately it is just a matter of resizing the external dimensions in order to fit correctly, so that is what I did. The internal…
Due to the heigh permittable in the K2 Plus, I've made a chamber section that is double the height. From the original you will still need to get 7 of the cmag mesh files, so please support thrutheframe by visiting the original page to…
This model clips to the chamber vent fan of the Q1 Pro and allows use of the carbon and HEPA sections of a Bento Box. I have my ABS set to a chamber fan speed of 10% and it works great. There is a flat version and a version with slots for…
I added a switch and hid the cable inside the design print no support needed easy to install How to install
Box um den Netzteilanschluss und On/Off Schalter für die Bento Box an meinem X1C unterzubringen.
Yet another fan duct for thrutheframe 's awesome BentoBox v2.0 . Instead of relying on soldered in brass inserts (which I don't have at the moment), the M3 screws holding the fans tap directly into the model's plastic. I recommend…
I wanted to mount the Bentobox somewhere in the enclosure on my Ender 3 S1 Pro, so I made this. It doesn't work with the screen mounted, obviously. Printed without supports with 15% infill and 4 walls. Modify as you need to for strength.…
Why would you run your filter fans if the air is already clean? Why would you detect air quality if you can't clean it? This model takes the recommended sensors from Sensorbox v2 and puts them inside a BentoBox v2 compatible box. The…
this is the Bento lunch Box I have designed. The top of the box has a D20 logo on it. The first files are the test fit pieces because I have not printed them myself. If they are too small or too Big just adjust the scale in your slicer.…
I didn't like how the fins were super thin and were basically just a bridge layer so I removed two of them, thickened up the remaining two, and added a support bridge down the middle to strengthen them. I also adjusted the angles of the…
Remove harmful fumes and VOC from the air to keep you, your family and your pets safe. This mod uses proven HEPA and activated carbon filters with powerful 5015 radial fans to achieve a 5.5x improved filtration over the axial version!…
Print in PETG or some other Filament which can withstand some higher temperature.
Removed the cable channels on the side. Grab the rest of the models from the BentoBox post.
I printed this in ASA-CF from BambuLab and PLA-CF from Sunlu. Both printed great, but the picture is the ASA print.
A little handwired macropad that you can take anywhere! Features 5 MX-style switches and one rotary encoder.
Simple guide for the Bentobox fan wires to keep them tidy. Uses the un-used fan bolt holes, so you will need : 2x M3x25mm bolt 2x M3 heat set inserts If you've built the Bentobox yourself you should have extras of these on hand
This is a modified version of the Bento Mini Cradle. The default cradle is kind of high and takes up a large part of the V0 side panel, which is likely good for air circulation around the bed but prevents the use of clip-in lights (i.e.…
Inspired by the great BentoBox V2.0, I set out to design the biggest HEPA and activated carbon air filter that you could reasonably fit in a Bambu X1 or P1-series printers. I'm calling this a “beta” only because this is the first time…
Bento Backpack is a fan duct mod for thrutheframe 's awesome BentoBox v2.0 . Motivation I wanted to add a HEPA filter to my Voron 2.4 printer, as I currently only use Carbon filters under the heated bed. Since I use the BentoBox filter in…
I was tired of always storing the FX Ultra Mini in the original box, so I quickly constructed a box from https://bento3d.design/ and customized the inlay. The foam inlay from the original box is still used, which slides very smoothly into…
The QIDI Plus 4 doesn't have enough spare volume in the chamber to include a Bento Box filter. This model allows the bento box to be installed under the bed while still being fixed in place and intaking air from above the bed where the…
Bentobox mount for Qidi X-plus. This is made to fit on the left side of the printer; it friction fits in a gap in the panel and shouldn't require any holes or drilling. There are two holes for heatset M3 inserts, I used 8mm depth ones,…
This is a mount so my Harley Benton PowerPlant ISO-5 Pro is more “stable” below the Harley Benton SpaceShip 50C pedalboard. Printed in PLA on a Longer LK4 Pro
Small modification of the fanbox by https://www.printables.com/@FGachapon_2157470 to allow for a smaller 10x15mm rocker switch. Brought the logo back as well to make it match the other parts of the Bento Box
Das Werkzeug ist dafür gedacht die Bremskolben von hydraulischen Mountainbike-Scheibenbremsen ordentlich zurückzudrücken, wenn die Beläge bereits entfernt wurden. Es sollte bei allen Bremsen passen, notfalls vergrößern/verkleinern.…
My Voron 0.2 has the printed tophat extenders which increase the internal air volume (a worthwhile tradeoff to prevent the umbillical from rubbing). With both side panels installed, the lower chamber thermistor can reach 50 degrees and…
A replacement backplate for this pedal that makes the back flat and allows you to use Velcro to secure it to a pedalboard. Original screws can be reused. I recommend 4 tops, 4 bottoms and a relatively high infill percentage to make the…
Smiggle Bento Small Lunchbox Replacement Clip - For printing when the lugs on the lunchbox no longer retain the clips. Removed the remaining lugs and drilled a hold to suit the model.
I made this model as a way to securely mount a mini-bento to the inside of my yoopai fabric enclosure that uses 8mm plastic rods as the frame structure. it fits underneath the voron cradle stl, and it has screw holes smaller than the…
This is a model I made for my bentobox to be secured onto the rods that frame my yoopai enclosure. It has holes slightly smaller than the mounting holes for the voron air duct stl available on the Bentobox model page so you can screw into…
This is a remix of the BentoBox V2 Slim for K2 Plus , a derivative of the original BentoBox . You need all the other parts from the original BentoBox V2 Slim for K2 Plus ; this is only a feature add-on for the fan case to improve the…
I printed in PLA at 40% infill some minor trimming may be required to make it slide over the pins - don't overdo it!
This is a front light mount for a bicycle equipped with a Nitto Lamp Holder , used on the SimWorks Obento front rack. It's similar in mounting to a Paul Gino and other light mounts, however it's intended to use a stem cap to mount it…
I couldn’t find a version that fit inside my printer, so I modified the fan base to be 10mm shorter and added a cutout on the right side. I also included a through hole at the back wall to allow mounting the base to the rear of the…
I really liked the box from @ROLS733, but also wanted a space for the Wolkenkraft Bubbler and Bong adapter.
I like the more compact design of the Asica10 Bento remix. This plate mounts directly in the factory secondary fan location. The filter's airbox mounts to this with M3x12 without heat inserts. This plate mounts to the printer bed with the…
With a BentoBox sitting on this raised platform you'll have easy access to the wiring cabinet from the top. You won't need to remove the Bentobox to access the wiring. My Voron is a Siboor 300 Trident and I'm very happy to have this…
A BentoBox mod for 9733 blower fan that has stronger static pressure and higher airflow. It is designed to create a vacuum in the tower sucking the air from top to bottom. The idea was to make the intake sound quieter and keep the blower…
An addon base to fit a boost converter to power the fans in a BentoBox. Has slots for a power switch and a barrel jack. Supports 4x2mm magnets, like on the original BentoBox. This was made to fit in a Bambu Labs P1S using the inner 5V…
simple support to place Harley Benton power supply under pedalboard with 4 screws
I've removed all the mounting points and replaced them with two 10x60x3mm magnets. Most importantly I cut out the rear corner so it can sit flush against the metal panel (important for magnets). I used some super glue to fix the magnets…
A travel case that is inspired by a bento box for your Philips all in one trimmer Series 5000 and accessories. It can hold up to 8 different trimmer guards.
Bento mini low profile voron0 cradle for “ https://www.printables.com/model/517219-bento-mini-for-bambu-lab-x1c-p1p-and-voron-v02 ”
Heavily inspired by the BentoBox recirculation filter , the BentoRoll is a recirculation filter for the Prusa CORE One. The normal BentoBox won't fit without removing a side metal panel. Instead, this design replaces one of the side…
My modification of the Bentobox V2 base unit for the Centauri carbon. The screw mountings and recess on the underside have been removed. A recess has been added to clear the frame ledge inside the Centauri Carbon and allow the base to…
I was building an enclosed Mk3S printer for a local school and needed a way to keep the Bento Box from tipping over in the Prusa enclosure, but it also needed to be removable so that the carbon and HEPA filters could be changed out easily…
This is a Mount for Bento Mini to be used for Qidi Plus 4. Add negative modifiers on it so you coud put whatever magnet you have at hand. Printed mine with Abs GF
I've been through a few bento boxes in my other printers. When I tried the 5015 fan version is when i felt that it finally had some real airflow. The 4020 and 4028 fans just didn't move very much air, especially when trying to push…
Modified the AD5M mount to have access to place a switch to turn on the filter. Also removed the left side cutout for a cleaner look since I was only going to use the right cutout. Dimensions of the switch cutout: 19mm x 12.7mm Printed in…
A very quick remix of the BentoBox base w/magnets and an additional magnetic wire guide for use in the Elegoo Centauri Carbon (though both will likely work on other printers). Uses the same magnets as the BentoBox itself (since you likely…
just print it ;-) Add an additional Design with only 15 degree elevation.
Minimal remix of the 120mm fan bentobox. Only a small recess for the small edge was added to the interior of the case so that the bentobox can be placed flat on the inside of the side panel. In addition, a few recesses for 4x2mm magnets.
Magnets used: https://www.amazon.com/dp/B075RXP4KL?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2 Takes about 33 to 36 mins to print using 2 walls, 15% gyroid infill. Printed in Burnt Titanium PETG from Flashforge. One clamp should be…
Nigiri Bento Organizer Box The Nigiri Bento Organizer Box is a playful and functional storage solution that brings a touch of sushi-inspired charm to your workspace or living area. Inspired by the iconic shape and textures of a nigiri…
The stock base doesn't fit, these are the mods needed to make it work well. I put a couple of strips of thin double-stick tape near the front to keep it in place, and also help tilt it back to make sure it won't interfere with the plate.…
I loved @gnticxe idea of adding a cable run and switch to theBentobox v2 base but unfortuantely the cutout underneath for the “L” bracket was too short and would not fit my P1S. This model fixes that issue. It leaves enough room for two…
Modified base to fit in between the auxiliary fan and the back panel. Removed mounting loops and added internal mounting holes.
Easy and convenient power input for the bambulabs P1S (or other compatible machines). This allows you to externally power devices such as a bento box without any permanent non removable modifications to the machine! You will need some…
