Bento Box Slim
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model uses all the parts you know and love from bento box v2 project. Designed in slim profile of 45mm * 116mm.
- Rating
- 5 / 5
- Likes
- 87
- Downloads
- 412
- Makes
- 4
- Views
- 4,084
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a bento box air filter for my printer but couldn't find a suitable place for the original bento box. I also wanted to share parts with my friend who owns a Bambulab. So, I launched Fusion and created a design that could fit into the space between the print bed and back wall. This required a design less than 48mm thick.
The design only uses up 45mm by 116mm of space, while retaining the fun of having a bento box. It fits two 4020/4028 fans with ease. When printing, please download the CMAG .STL file from the original source.
A STEP file is included if you want to modify my design or add support for your printer.
**The Qidi Q1 mounting uses the original screws on the printer: two screws accessible after removing the rear cover and another one located near the linear rod. A washer is needed if your printer has a different height. I removed the exhaust fan, sliced the fan into the JST XH (2.54mm pitch) connector, and plugged it into FAN-0.** Test clearance by manual moving bed before running any print.
Print with PETG, ABS, or any plastic that can withstand a heated chamber. You don't want it to melt, do you?