1 / 3
Steering handle protection cap for Piaggio MP3 530
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scratch protection if your bike tips over. Print with TPU and slide it over the original cap.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 35
- Makes
- 0
- Views
- 446
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dimensions: The inner radius of this protective cap is 33-38mm, the screw hole is 13mm, length is 42mm.
If your bike tips over it will probably land on the steering handle and scratch it.
This is not a replacement for the original steering handle cap. You should slide it over the original cap to protect it.
I've printed it with a flexible material (TPU).
I've sliced it in Sovol Cura, normal setting (0.15 mm layer height), 220C nozzle, 60C bed, 40mm/s speed, no supports, ‘make overhangs printable at 50 degrees’.