Mini seed starting cup/pot
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.00 – €3.67 net (excluding VAT)
For file: 6xMini_seed_starter_cup_0.3mm_PETG_MK3S_3h19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.33 excluding VAT (range midpoint).
- Weight reported by the author
- 45 g
- Print time reported by the author
- 3.32 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A tiny cup for a little bit of soil and single seed.
- Rating
- 5 / 5
- Likes
- 219
- Downloads
- 1,531
- Makes
- 19
- Views
- 9,246
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
The cup has tiny holes on the bottom so that the soil can absorb water from a tray.
The cup has very thin walls on purpose so that it's easy to flex it and remove the compressed soil with the plant once it's time to move it to a larger pot. For this reason, I suggest printing the cups from at least a bit flexible filament, such as PETG.
I've printed mine from Prusament PETG Neon Green.
The mini greenhouse in the picture is an off-the-shelf seed starter, I believe I bought this one in Lidl :) I've just put a few grow LEDs inside to heat up the chamber and give the plants plenty of light.
Featured in this video: