1 / 2
Bowden Tube Y-Splitter with PC4-M6 Connections and Attachment
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows to use Bambu Lab's AMS with external filament.
- Rating
- 4.667 / 5
- Likes
- 29
- Downloads
- 409
- Makes
- 5
- Views
- 1,596
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Print with ABS or PETG with brim and no support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. Don't use too much force when screwing in the PC4-M6's. Fully push the bowden tubes through the PC4-M6's.
You must use “UNLOAD” when removing the external filament, not manual retract. This will give the filament a clean cut and it will not stuck in the splitter.
See also: https://www.printables.com/de/model/584189-clean-bowden-y-splitter