1 / 2
Dell Precision 7550 Dual-USB-C Dock Connector Lifter — image 1
1 / 2

Dell Precision 7550 Dual-USB-C Dock Connector Lifter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

My work computer - a Dell Precision 7550 - has a docking station with two USB-C connectors which needed strain relief.

Rating
5 / 5
Likes
17
Downloads
123
Makes
1
Views
1,192
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Laptops are expensive, and if you're using a Dell Precision 7550 with the dual-USB-C docking connector, you're heading in a direction that's going to require you to replace your motherboard. Of course, motherboard replacements are expensive, and they're likely going to happen one day after your warranty expires.  So what do you do?

This. Print this.

Stick it under your docking plug/cable, and save your USB-C charging connectors.

I've had numerous customers bring their laptops to me, with intermittent or no charging, just a year or two after purchase. If it's in warranty, that generally means you have to give your laptop to someone else for a few days - maybe a week or two - and who can live without their primary computer for multiple weeks? Not I. And if you're unlucky enough to have the charging port fail inside the laptop outside of warranty, you're looking at a very expensive repair - in addition to the time you have to spend without your laptop. Bad news.

This design slides in from the left, and locks in, holding up both the plug and the cords up, eliminating the angular strain on the dual USB-C ports. When I initially received the laptop, I immediately saw that it was going to be a problem - small connectors, known failure point, heavy cables leaning off and pulling down on the connector at a sharp angle - so I prototyped something for underneath the cable in LEGO bricks (shown in the picture) and after a year or so, I decided to design and share a working solution that blends in and does exactly what you need it to. You can also print this in other, fancy colors like white, gray, or even glow in the dark. Anything to save your poor USB-C ports! I promise your laptop - and wallet - will thank you for this simple measure!

As an aside, I did add the “DELL” logo to the initial print, but the side wall plateaus weren't really big enough for the logo to look good. I figured folks would prefer to have a compact and functional design - something they could throw in their laptop bag for travel or whatever - rather than make the lifter wider just to make room for a logo, so I removed it.

If you have any questions, suggestions, or comments, please leave them below. I love it when people print and use my designs, so please share a make if you can!

Also, I only have one Dell laptop that uses this specific dual-USB-C docking connector. If you have a different laptop - from any manufacturer - that uses this same connector configuration and height, please let me know. Also, if you have the same problem, but you need a different configuration (say, a single plug, at a different height), just give me all the specs, and I'll try to make one for your specific needs and post it here. Obviously, please let me know the brand (e.g., Dell), the make and model (e.g., Precision 7550) so I can label it for other folks looking to find that specific item.

 

Tags