Suspended Lowpoly Skull
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€13.66 – €16.69 net (excluding VAT)
For file: Calavera_16h48m_0,20mm_200C_PLA_ENDER3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €15.17 excluding VAT (range midpoint).
- Weight reported by the author
- 156 g
- Print time reported by the author
- 16.8 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
3D-printed desktop ornament featuring a floating skull. Print at 0.2mm layer height, no supports needed.
- Rating
- 4.867 / 5
- Likes
- 740
- Downloads
- 2,922
- Makes
- 15
- Views
- 12,098
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This artistic desktop ornament features a floating skull within, thanks to the ingenious use of bridges enabled by 3D printing technology. For optimal results, it is recommended to print the piece with a layer height of 0.2 mm and with just two walls, which is sufficient to keep the structure in its proper position. It is crucial to note that each bridge is delicate; therefore, any contact or pressure that could detach it should be avoided. No supports are required for printing, and the original orientation should be maintained to avoid complications. If you do not see the bridge lines in the slicer preview, ensure that the first layer's height is set to 0.2 mm.
UPDATE 15-09-23: A .3mf file has been added for multi-color printing with MMU3, in a two-color setup.