Window frame for acrylic/plexiglass observation window for a 3d printing enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model of Window Frame for Enclosure for a printer, usable for other things too, fixed in place with bolts n screws.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 54
- Makes
- 0
- Views
- 1,292
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
The Window size should be the same as the bottom frame layer & should be able to hold it. Use petg for heat-resistance.
I cut a hole in the wood a tiny bit smaller than the window, i measured the acrylic would fit in the frame of the 3d print, made some adjustments to the wood hole and plexiglass, used kit to put it in place while the screws were in for good placement, measure out ur location before sawing in the wood.
Petg is used to be heat resistant but pla or any other decent filament should be oke for it if u dont need heat resistance.