Mini Scraper Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.47 – €1.79 net (excluding VAT)
For file: miniScraperHolder-4a_0.4n_0.3mm_PLA_MK4_1h13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.63 excluding VAT (range midpoint).
- Weight reported by the author
- 29 g
- Print time reported by the author
- 1.22 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mini Scraper Holder for mini scrapers that use single-edge razor blades. Holds one mini scraper and one spare blade.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 33
- Makes
- 1
- Views
- 195
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I created this Mini Scraper Holder to safely store a mini scraper when it's not being used - while also allowing easy access. There is also a pocket for storing a spare single-edge razor blade. It is intended to be screwed onto a wall.
CAUTION! Be sure to attach this Mini Scraper Holder where children (or others who shouldn't have access to razor blades) can't access it!
Please see the attached photos for examples of mini scrapers supported by this design - which are sold under many brand names and available at most hardware stores.
The provided STL file is intended to be printed in PLA (though PETG, ASA, or ABS should also work fine) and does not require supports.
A PrusaSlicer 3MF file is provided for generic PLA, and a G-code file is provided for the Original Prusa MK4.
A STEP file is also included for those wishing to remix the design.
The Mini Scraper Holder seen in the photos was printed on an Original Prusa MK4 in FilaCube Red PLA with a 0.4mm nozzle at 0.3mm layer height with a 5% gyroid infill. You can increase the infill - perhaps to 15% - if you want a smoother appearance. I'm ok with 5%, since I have mine in the basement and in the garage.
Be sure to check out my other designs - including honeycomb storage wall (HSW) accessories, universal key covers, and a diverse collection of household accessories and 3D printing tools - on Printables at https://www.printables.com/@PhilCaruso_661446/models