E3D V6 Gardena System Watering Nozzle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 5mm nozzle for the Gardena watering system
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 257
- Makes
- 1
- Views
- 1,185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
For all you 3D printing nerds…
This is a 5mm nozzle for your Gardena watering system. If the interrest is big enough i will create different diameters, if you want your water to leave the nozzle with a higher line width. But your water extrusion system (water hose / pump) must be able to handle this. And for very fast watering i will make a Volcano style nozzle with a longer melting zone for the water to melt faster.
Print this with the nozzle tip on the printbed and the Gardena coupling on top.
You have to source a rubber o-ring with 16mm outer diameter and 2.5mm ring width yourself for sealing with the Gardena coupler.