GPU Stabalizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It is a screwed GPU stabilizer, which is countered with a nut.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 43
- Makes
- 0
- Views
- 632
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
It is a screwed GPU stabilizer, which is countered with a nut.
There are two different sizes: large (dimensions: min: 85mm; max: 140mm) and small (dimensions: min: 55mm; max: 79mm).
For a perfect fit, you need to scale the pod and the nut up by 3% in the x and y directions and down by 3% for the screw.
The nut is universal and can be used for both versions.
I would recommend printing it in PETG or ABS because of the high temperatures inside your case. But PLA works fine for me.
If you have a Prusa Mk3s/Mk3s+, you can use my G-Codes for PLA directly.
Recommendations:
Material: PETG or ABS
Printing: Brim for the large screw and pod
Temperature: Extruder: 215°C
Bed: 60°C