GPU Stabalizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a screwed GPU stabilizer, which is countered with a nut.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 632
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
It is a screwed GPU stabilizer, which is countered with a nut.
There are two different sizes: large (dimensions: min: 85mm; max: 140mm) and small (dimensions: min: 55mm; max: 79mm).
For a perfect fit, you need to scale the pod and the nut up by 3% in the x and y directions and down by 3% for the screw.
The nut is universal and can be used for both versions.
I would recommend printing it in PETG or ABS because of the high temperatures inside your case. But PLA works fine for me.
If you have a Prusa Mk3s/Mk3s+, you can use my G-Codes for PLA directly.
Recommendations:
Material: PETG or ABS
Printing: Brim for the large screw and pod
Temperature: Extruder: 215°C
Bed: 60°C