1 / 1
Harbor Freight 5lb tumbler bowl higher capacity — image 1

Harbor Freight 5lb tumbler bowl higher capacity

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This bowl increases the capacity of the Harbor Freight 5lb tumbler.

Rating
0 / 5
Likes
12
Downloads
65
Makes
0
Views
293
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Higher capacity tumbler bowl for the HarborFreight 5lb tumbler.
It is designed to use the original bowls gasket and lid.
This bowl also has a higher side wall angle, increased height of the center post, decreased diameter of center post, higher angle on both the outer wall and inner center post, as well as wall ribs that run all the way from the center of the bowl side to the center post. This adds up to a more turnover of the media leading to reduced tumbling times to achieve the same effect as the original bowl.

I printed the bowl in PLA+, without supports and 25% infill.
 

Bowl attaches to tumbler with original nylock nut. If you want to wet tumbler with the bowl make sure to add a stainless steel washer and rubber gasket under the nylock nut.

Concept/mybowl based on 
 

Tags