Large Popcorn Scoop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My daughter needed a popcorn scoop for her Jane Austen Society meeting/movie.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 103
- Makes
- 0
- Views
- 550
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
My daughter needed a popcorn scoop for her Jane Austen Society meeting/movie. I made it to fit comfortably in the large popcorn bags she has so the scoop is 4.5" (115mm) wide by 3" (76mm) high.
I embossed a JA logo for her use but the downloads have both with and without the logo.
The handle attaches with two M3 screws, I used low profile socket head screws I got off Aliexpress but any should do if they are 10-20mm long.
I printed in PLA with default setting on the “blade” and increased the perimeters to 4 on the handle. No supports needed if you print the blade pointing up and handle on the flat bottom. Use ASA or ABS if you want to put it in the dishwasher.