1 / 6
osVAC dust extraction for Festool MFT 200x100mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An osVAC-compatible dust extractor which can be installed on a 20mm multifunction table (e.g. Festool MFT).
- Rating
- 5 / 5
- Likes
- 83
- Downloads
- 310
- Makes
- 1
- Views
- 1,608
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
An osVAC-compatible dust extractor which can be installed on a 20mm multifunction table (e.g. Festool or Wolfcraft MFT).
I adopted the original design by ggragg to add an osVAC adapter. The 20mm mounts for the table are the orignal ones.
Assembly instructions:
- The hood has two 20.4mm ports for adding mounting accessories.
- The "20_4mm M6-hex plug.STL" was design to hold a M6 nut and to be glued in place
- The "20_4mm M6-hex dog.STL" was designed as a removable support post for mounting into a 20mm hole or 20mm accessories
Note: This is a remix. All kudos goes to ggragg! (Link see below)