HP DESIGNJET T120 PLOTTER (and others) Cutter replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remixed 3d model of the cutter engine for some HP Plotters. Code part: CQ890-67108
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 174
- Makes
- 1
- Views
- 691
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This is the Cutter Gear for HP Designjet Plotters like T120, T125, T130, T520, T525, T530, T730 or T830. This was remixed from original at Thingiverse by ripetomatofetish for better fit on the cutter case.
I remixed the stl on Sketchup, so I also give you the skp file.
The HP code part of the Cutter is CQ890-67108.
As you can see in the front picture the white plastic gear is the original and is easy to break in longitudinal section, making it unable to cut, so you can repair it removing the bearing of the original white plastic HP gear and fit in on the 3d printed part. I recomend you using a Plastic with good mechanical properties. PETG is enough.
Could be important to say that the technical service wants to change all the cutter for more than 200€ + taxes as minimum, only for a broken gear. The plotter value when I bought it five years ago was about 600€. Approximately a 40% of the original value.
You can view some maintenance videos to learn how it is:
https://www.youtube.com/results?search_query=hp+designjet+t120+cutter