31 models
I designed it in two parts so you can always design a different “wall” mount and just snap the router mount in place. The router mount itself is not too tight so it should be easy to mount the router in. It prints with no supports. I…
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
This is the Cutter Gear for HP Designjet Plotters like T120, T125, T130, T520, T525, T530, T730 or T830. This was remixed from original at Thingiverse by ripetomatofetish for better fit on the cutter case. I remixed the stl on Sketchup,…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Simple under desk mount with screw hols to mount your GL-SFT1200. The small holes ( to be screwed in are 3 mm ) and the bigger once are 12 mm for easy tool access. I printed mine in PLA to get it a bit more ridged. 0.6 mm nozzle and 0.3…
Opal mount with a clip to hold the router in place.
Update 9/6: Found the sweet spot for printing this at an angle. I have added a new 3mf file with the exact orientation i printed at. Bambu Slicer gives a angle of 59 degrees for the Y axis. I also changed to glass infused ABS and it has…
I wanted a way to attach my travel router to the telescope mounting plate for Astrophotography. With the powerbox the only cable that needs to leave the scope is the one power cable and all other cables are contained neatly on the scope…
Allows to mount the router sideways on a DIN rail. (Here used together with DC power supply and relay to power Starlink antenna) Uses M3 socket screws
So I originally made this so I could attach magnets to the case and allow it to mount to rack mount cases (using custom blanking plates with magnets as well). You can also mount this to the wall if need be. The tight is fit and you might…
The shelly pro 3em smartmeter comes with 3 120A current clamps, which can be hard to fit in case you appreciate a tidy cabinet arrangement. This is why I created this DIN-rail mount. It's not overly space efficient and requires some…
Just some simple 43mm Hornby track spacers for laying track This example was printed in PETG as its what I had loaded at the time but should be fine in PLA PLA 0.2 Layer No supports Print as orientated with text on the plate
I wasn't a fan of the rubber-band handlebar mount solution. It works, but it feels a tad cheap considering the cost of the Beeline. I also wanted to use the charging adaptor so I don't need to worry about battery level. This print better…
PETG or other filament with similar flex recommended. Haven't tried with PLA but might work. Brim also recommended but depends on your confidence on your bed adhesion. Print with the probe holder part down on the bed. Needs a few…
I have a Fluke ST120 / ST120+ and want to protect the face from getting messed up in the toolbox. Printed in PLA with supports (big overhang), it simply pops on and of. To remove it just pinch the angled end and case together. There's a…
So a while back I discovered the UT120C to be a really good all around cheapy meter for the basics around the lab and on the road. Since I really dident like the original case I createt my own carying case. Print instructions Soft PLA (or…
The model was printed with Extrudr semi-soft TPU filament and a layer height of 0.2mm. It was tested with a UNI-T UT120B, but should work with the A and C variants too.
Update: After 2 weeks of use, the heat from the heatsink and driver was too much and the PETG deformed too much. Using a temperature controlled heat gun, I've reshaped back into the original shape and now testing with a lower powered LED…
Front panel for mounting the power socket XT120 into the case using M4 screws. The socket must be glued in place (main) with superglue. For reliability, the socket is pressed with a cap using M3 bolts. Printing with smoothing. The…
An out of the way placement for the affordable travel router SFT1200. I created three parts including the main body that needs no supports, and the locking pieces to make it more stable. Can be permanently mounted using the 2 M4 screw…
ARTE&DISIGN GT120 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Since the standard case is kinda cumbersome here is a clip on case with an easy wind on area. Print without support, then clip out the support piece at the cable cutout Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No…
Gridfinity tray (6 by 2 squares) for the KAIWEETS ST120 "pen style" multimeter
ORGANIZZATORE GT120 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
Underdesk mount for GL.iNet Opal Hardware: - I used M6 bolts
3D Printer Ventilation for Resin Printers — 120mm Fan Version by 3DVenting.com These are the 3D-printed plastic parts for a dual 120mm fan ventilation system designed specifically for ELEGOO resin printers. At 250 CFM, this is the…
Just a file so people can add the nametag on the RobotUp T1200 Pro.
The support base for the protection part in the B&D BT1200 drill broke twice, even after repaired, so I did a quick replacement part. Print Settings Supports: No Resolution: 0.2 Infill: 30 Filament: generic PLA PLA How I Designed This…
Same print setting recommendations as with the original version of this design still apply (100% solid, output each object complete if printing all on the same print bed, etc.). Also, the files attached are STEP files for the same reasons…
Found a need for this after the original cracked after hitting either a tree root or rock in the yard while I was at work. Since this cannot be purchased directly from the OEM without a warranty claim, I figured this was a good use case…
Remixed Version for Decathlon RockRider ST120 27.5Inch Bike. Approx internal shaft diameter >22.6mm (23mm) The original design: Always keep track of your bike Before - the holder inserts and locks into the opening underneath the front…
Underdesk mount for GL.iNet Opal Hardware: - I used M6 bolts
Update 6/4: Highly recommend figuring out how to print this at a 45. The flat one broke pretty easily, the ears came off with the first accidental impact with the curb. The other one, other than not wanting to feed because of the ruff…
