Hadley Hill Mount Clamp Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hill mount-compatible part for the adjustable pressure clamp mod
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 155
- Makes
- 2
- Views
- 735
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This part is derived from the Adjustable Pressure Clamp. It is slightly wider than the original to make it compatible with the Hill Mount.
print this alongside the original parts of the clamp. Use this instead of Lower.stl and/or Lower - mirrored.stl files from the original. You'll have to mirror it yourself in your slicer if you want a second one for the opposite side. I only needed one for my setup.
Print in PETG and make it thicc to prevent breakage on the layer lines. I used 5 walls and 35% rectilinear infill. I was able to get away with using an M4x40mm socket head bolt with a nut thread locked to the head of the bolt.