17mm RC Hex Wrench
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hex wrench for 17mm wheel nuts
- Rating
- 5 / 5
- Likes
- 73
- Downloads
- 585
- Makes
- 7
- Views
- 1,643
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 17mm RC wheel wrench I designed for use on my 1/8 scale Arrma & Mugen rc vehicles. The shape is ergonomic and height is optimized with a thru-hole for access to the axle set screws on most 1/8 scale RCs. The tool works great for my usage with serrated nuts, so I don't crank down the torque to extremes. Obviously this is not as strong as a metal wrench or fiber-reinforced plastic, but I’ve had no nuts come loose or off in my use. If you tend to overtighten wheel nuts this might just be a good spare to have in your pit box instead of a primary.
Print Instructions
Printed in PETG, 0.2mm layer, 20% rectilinear infill, 3 perimeters, no support needed