Counting matching models…
I designed this because I couldn't find any 9x17mm aluminium u-channel here in Australia and really, this is one of the great things about 3D printers - if you don't have it, you can make it. The drive to make this was for use with…
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
This is a 17mm RC wheel wrench I designed for use on my 1/8 scale Arrma & Mugen rc vehicles. The shape is ergonomic and height is optimized with a thru-hole for access to the axle set screws on most 1/8 scale RCs. The tool works great for…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
Wheel Wrench/Shock Cap Tool for easy disassembly of wheels and damper bodies. A dedicated set of RC tools are a must when getting into this hobby. Why not have some 3D Printed ones in the collection as well? Save some money with these…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for PETGSource material: PET
I don't have and flex filament on hand but it's supposed to snow so I threw these together and printed a couple in PLA. Used size and offset from my Arrma Typhon. They fit great but I haven't had a chance to test them out yet to see how…
Print approx. €8.33–€10.18 excl. taxPreliminary estimate for one variant
Simple Covers/Caps for rusty 17mm Hex BMW Wheel Bolts and the Lock Bolt. The Caps have a snug fit if printed on Prusa I3 MK3s or similar good calibrated Printers. On other Printers you will have to play with the Scale to get a good fit.…
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for PETGSource material: PET
Hallo, wer auch einen Anderen Adapter braucht…… Viele Kaufhalterungen haben ein Kugelgelenk, welches die 17mm kugel hat. Ich hab hier ein einen Adapter zum Kabellosen Laden.
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
I edited the original model from In3DSpace to fit 7x14mm extrusion u-channel.
Print approx. €4.97–€6.07 excl. taxPreliminary estimate for PETGSource material: PET
Hi there! I love small form factor PC's (SFFPC's) and my first foray into them was with the DAN A4-SFX case. The case was great was amazing until the RTX30 series launch and aftermarket GPU cooler sizes blew up to the point they couldn't…
Print approx. €20.68–€25.27 excl. taxPreliminary estimate for PETGSource material: PET
Adaption of 17mm ball mount to use M4x30 skrew
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
The Garmin DriveSmart 86 has a 22mm ball joint instead of the other model's 17mm, so this converter lets the GPS be used with the standard mounting equipment. For printing, I used: 6 Perimeters 100% infill .20 layer height I have tested…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
AdBlue Cap Wrench Tool This innovative tool simplifies the handling of the AdBlue cap, making it easier and more efficient for vehicle owners. Designed specifically for Audi, Seat, Skoda, and VW models, this tool ensures a secure grip and…
Print approx. €3.53–€4.32 excl. taxPreliminary estimate for PETGSource material: PET
This is an improved version with an hole. Use an M3 x 30 screw and press-fit a M3x4 bushing on the opposite side to keep the screw in place. Original design kept failing after vibrations due to the phone weight (I have an iPhone 16 with…
Print approx. €4.87–€5.95 excl. taxPreliminary estimate for one variant
I have a lifting jack with a 17 mm bolt to lift it. But it's a bit annoying to manually turn the worm bolt with the handle all the way. So I made this. The shaft fits nicely into a conventional cordless screwdriver chuck. Be careful not…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
This model is similar to the one it remixes, but the magsafe puck is on the same axis as the 17mm ball joint threads. I am using it with a third party Magsafe charger that has a stronger magnet than the Apple charger, but has identical…
Parametric (OpenSCAD) model to attach any MagSafe charger to any 17mm ball mount. Features a lip making the charger click into place nicely. Includes ready models for Anker A2560 and Apple MagSafe - good starting point for further…
It is recomanded to print in 90% infill and above I printed in ABS.
Simple interface plate with 4 locking lugs on one side and a 17mm ball socket on the other. Quick and simple in PLA, will likely build one in PET-G in coming weeks. Overture Easy Black PLA 6 walls, 25% infill, Exterior to interior…
Mounts an OEM Apple MagSafe charger to a 17.3mm ball commonly found on CD slot phone mounts. Print in a higher temperature material than PLA to avoid softening in summer heat.
I have an old holder that have a 17mm diameter ball but do not charge the phone so I made this Print the washer in tpu, I think there are rubber washer in hardware store can fit there if you can print it. I include a CD stand with ball so…
Another Remix, just because one of the standard sizes in germany for sandpaper (230mm x 96mm) lets me cut 2 sandpaperstrips out of it, but lets me with one strip of 230mm x ~16mm left. And so i decided to make a shortcut version of this…
Small wrench for AdBlue lid Fits for Audi A6 and others Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 20 Filament: Prusament PLA Yellow Category: Automotive
Compatible with the Tesla Model 3 (pre-Highland, 2021-2023) or Model Y center console. Print in PETG, ABS or other heat- and strain-resistant materials. PLA will soften in the hot cabin in the summer, not recommended. Print flat on the…
Short, new Version: https://www.printables.com/model/470834-phone-dashboard-mount-v2 17mm seems to be the default for many chargers using ball joints. I recommend printing in a Material with a higher melting temperature to prevent…
This adapter allows the installation of 17mm hex wheels onto 12mm hex spindles. The uploaded STL files are designed specifically for those wheels https://aliexpress.com/item/1005005155368361.html. You can use the provided SCAD files to…
Parametric AMPS pattern plate with ball for socket for phone mounts in cars. Fusion parameters can control hole diameter (¼"), the ball's center offset from the plate top (9/16in) and the ball diameter (17mm). Improvements you might want…
Random flow vortex generator for aquarium tanks. Easily push fits on to a 17mm straight outlet (e.g. Readsea Nano). The head snaps onto the connector. The position is held at your chosen angle using friction.
Holder for the original Apple MagSafe charger. Can be fitted to any existing car mount with 17mm ball joint. You can choose from two versions. They are only different in the height of the part. You will have to use double-sided tape to…
All prints are oriented for best placement. I used PETG but any filament should work. I used a .3 layer height but again you can print in finer detail if desired. Happy printing!
This is a desk organizer for SD-cards (with and without a plastic case), USB-sticks, USBC-devices/adapters, 5 pencil holders for two sizes (3x 8mm and 2x 11mm diameter) and three trays for individual use. There are also two versions of…
Let's world build for a second. Say, for example, you bought a specific wireless charger for your phone that can mount to your car. Lets say, hypothetically, it's this one . When it finally arrives, you then realize that the only two…
Simple 17mm ball mount adapter to work with my car phone mount and Proclips USA quick attach plate. Plate is ~50mm x 42mm. I printed it at .12mm layer height and 50% infill PLA+.
I bought a chonky noctua CPU cooler for my 011D only to realize my smooth brain never checked the dimensions of the cooler against those of the case… so here I am making an adapter that moves the side panel out roughly 17mm. ENJOY :)…
There are a number of different types of devices for automotive use (phone mounts, GPS, backup cams, etc) that connect to a stand using a socket that fits over a 17mm ball. This is a replacement stand for those devices. I made it to…
This GPS/phone mount slides into the slot for your CD player and locks into place. Should work with any 17mm ball receptor like Garmin, etc. Recommend using PETG, especially if you live somewhere hot. Do not recommend printing all parts…
Description I tried the original and it was VERY close to working for the MK4 however the extruder sticks up a bit higher so I modified it to clear the nextruder on the MK4. While I was in there making edits I decided to add some nubs to…
I love the espresso I pull with my Kinu hand grinder, but early in the morning I’m not always in the mood for a workout. This adapter allows me to drive my Kinu M47 Phoenix with a 17mm hex impact socket attached to a powerdrill, saving a…
This is a remix of Robert Pakosyan's double towel hook. I adjusted it from 18mm to a 20mm and 17mm and added a small screw hole to fit my cabinets. 17mm is for an IKEA cabinet door. Screw hole is for a small 3mm screw. 7mm head.. I also…
On the motorbike, I was struggling to find a suitable holder for my phone which didn't involve it being mounted to already cramped clip-on handle bars and that didn't sway as I moved the bars. Decided I would go with a tank-mounted setup,…
More fun with textured brushes. I used a thick fur on this critter but they tend not to be hairy like this. I used a dragon/lizard scale for the tail and for the teeth then pulled them out further with the grab tool. As usual I thickened…
While designing a holder for the Samsung S25 , I ran into the problem that I wanted a fully 3D design without using supports. At the same time, I needed a clean and stable way to connect a ball joint socket to the flat back surface of the…
The Problem: The original plastic nut on the Fixed wireless charging car stand (and many similar generic holders) is prone to cracking under stress or temperature changes. Once cracked, the phone holder can no longer hold its angle and…
Das ist eine Abdeckung für 17mm Sechskant Schrauben die bei Seat Skoda Audi und VW üblich sind. Es handelt sich um die Abdeckung für die normalen 17mm Sechskant Schrauben und NICHT um die Abdeckung für die spezial- oder…
I made this 17mm ball mount to attach a Belkin charger. Just stick it with double sided foam tape to your console. So far i had no issues with it. Due to high temperatures it's made of ASA. No special settings required. It's may prints…
Clips onto the back of the following tomtom models: START 42, START 52, START 62, VIA 52, VIA 53, VIA 62 The model obviously just provides 4 screw holes and not a ball mount, this is because you also need to print this model…
to use small quick-clamps as corner-clamps. Slot size = 17 x 3 mm Original from @GodnamedThor
This is my foldable ski pole clip for diameter 17mm (e.g. LEKI). For skiing both ends can be clipped to one pole. I found that PETG is better than PLA in this case. Use big walls and/or increased infill to make it stable. I also uploaded…
I needed a new key for a barrier pole an measured out its dimentions to create this. After testing and confirmed it working, i Improved the design to save some material. Category: Hand Tools
This filter guard has octagonal holes with a diameter of 1mm (maybe a bit smaller in the real print, depending on your printers accuracy). The dimensions overall are 102mm*50mm (the smaller one 92mm*50mm*). It fits on pipes with a…
This is a 17mm ball head mount for the Polestar 2 car's central control. It can be easily inserted into the ball head base without the need for adhesive, making it quite stable. The standard 17mm ball head allows for easy connection to…
The caddy holds (5) 1/4" OD insert tips and attaches to the unused strain relief holes. The intent was to match the aesthetic of the original release. The stl is in the proper print orientation. The 17mm generic iron holder is just for…
I hated to plug in my phone and lay it on my table so I had the idea to mount a Magsafe under my monitor. It charges and functions also as a clock with the AOD. Since there was no design for my alternate Magsafe I had to redo its design…
Phoneholder/charger 17mm ball adapter to mount chager to Transit Custom 2024 airvent. Groove inside model is to guide ziptie for easier install. I used fussy skin modifier to ball to get more friction. Hold very well phone.
Wheel nut cover for 17mm wheel nuts. Printed them in PETG. They are based on the VW wheel nut covers that has the little wire hook removal tool. The outer diameter smaller than the standard VW covers since the VW covers does not fit my…
Das ist eine Abdeckung für 17mm Sechskant Schrauben die bei Seat Skoda Audi und VW üblich sind. Es handelt sich um die Abdeckung für die normalen 17mm Sechskant Schrauben und NICHT um die Abdeckung für die spezial- oder…
Some simple wooden crates, open, half full and full. I may add a lidded version or mimic version at some point but this is what we've got today. Category: Other
These 2 adapters allow for mounting 17mm ball joint based phone holders that are commonly sold on chinese online markets. The adapters allow a variation of mounting positions, either vertically or horizontally depending on your needs and…
Simple riser for Qidi box for Q2 printer. High durability, fast printing time. Due to the variety of materials that can be used for the countertop, the choice of screws, bolts or glue is up to you.
This is a remix modified to let pass a 17mm nut Category: Tools
Remix for approximately 16mm and 17mm soldering iron - Sremtch MH9160
A remix of a pole mount for 150-100-70mm weatherproof boxes. Mine had slightly different hole spacing (117mm x 66mm). If you, like me, have issues with ASA dimensional inaccuracy even in an enclosure, try printing at 101% scale. I printed…
Eine Rohrschelle für 17mm dicke Rohre. Das Rohr in die Öffnung drücken. Gesamtgewicht 1g Print Settings Rafts: No Supports: No Infill: 20% Lines Post-Printing Category: Parts
I was trying to whip together some simple, fast terrain pieces and of course I found a way to distract myself and spend much more time than I should but I think this is super fun and silly. This is a remix of the "Full" crate that I…
Ich habe die Rohrverbinder entwickelt, da der Betttisch für den Laptop einfach viel zu hoch war. Somit habe ich die Rohrkonstrucktion um 7cm gekürzt und anschließen mit den Verbindern gekürzt wieder vernietet. Es funktioniert wunderbar…
Gridfinity Folding Ruler Holder (parkside <17mm wide), 6x1 Stackable, Done from scratch but inspired by model https://makerworld.com/en/models/1007747 Thinkercad link:…
I wanted to make flat surface adapter for my cellphone charger, wich had only posibility to mount on airvent. 17mm ball adapter for cellphone charger/holde for flat surface.
No magic arms, No claws, Only 3d printed parts and screws! type A self tapping screw, M6 x 40mm X2 and 20mm M6 1t washer X2, that's all Print it with support
could probably have gone to Bunnings and bought one, but decided to design and print. 50% infill works well and don't over-tighten the screws into the wall, otherwise may crack the plate.
Basically as dangerous as a Bulette if not moreso. These critters live in colonies and infest farmers fields. Your cattle and children will break their legs if they misstep into one of their holes. This is really similar to the squirrel…
A sturdy mount for car CD slots. Features a standard 17mm ball joint compatible with most phone holders and GPS mounts. Fit: Tested in a VW Golf (2007) RCD300 radio – holds very firmly Pro Tip: For the best stability, slightly heat the…
Lengthened the stem and thickened body version of Garmin Quad Lock Adapter (17mm ball to Quad Lock Female) by andybcole - Thingiverse Fusion 360 file included so you can change ball size etc. but I warn you, its not a pretty timeline :)
Hice esto para dar iluminación a la impresora, yo use un perfil que compre que tiene las medidas de 17,15mm de ancho y 7,7 de alto sin el disipador. Largo de los perfiles: 31,3 y 28,3 cm. Las tapas hay que cortarlas un poco para que…
ALPA mount 17mm/34mm tilt extension adapter provide in 3 styles: 34mm two ways 34mm mono way 17mm mono way CNC front/rear mount: https://gy2025.com/#/Developer/modelDetails?No=CNO26010596282
The sealing cap is printed with flexible filament (Ninjaflex 85A) and do not need support. First sealing ring is smaller for easier mounting. To adjust to other diameters, scale in Prusa Slicer to your needs.
holder for 7x17mm led profiles to be screwed into either extrusions or in my case tophat
this clever model allows YOU to mount a standard 17mm ball mount on your standard citroen air freshener caspule, Giving it a new purpose: holding your phone. This model mounts to the top of the capsule replacing the caspule cap, giving…
The plastic connecting parts that transfers power from the gearboxes to the rear wheels. Part #74460-2249 Modified to fit 17mm axle
Introducing the ultimate tool hook designed for strength and versatility! This robust hook is ensuring it can hold a wide variety of items—whether it’s gardening tools, workshop equipment, or sports gear. Engineered to provide maximum…
écrou épuisette télescopique M33, 17mm, pas de vis de 2. J'ai modéliser cette écrou d'épuisette à partir de l'original car ce dernier est fendu en deux. J'ai réaliser l'impression de se modèle en PETG-CF pour lui garantir une bonne…
A fully functional 17mm combination wrench, accurately modeled for real-world dimensions. While this 3D-printed version won’t replace a steel wrench in the garage, it is strong enough for light tightening and perfect for educational…
Wahoo speedsensor mount for small track hubs. Mine is DT Swiss rack Hub with 17 mm diameter, so the original mounting hardware from Wahoo does not fit. This mount uses a small zip tie for a nice and firm fit. Printed in PETG with 100 %…
A very robust, yet minimal case designed for single SRD relay boards sized approximately 70x17mm. Prints fast, clean, and small - pop it off the build surface, and use it instantly. Mounts to 20XX, etc with M3 Hex Cap Bolts - use printed…
Hook to be mounted on top of a 17mm thick cabinet door. Use small piece of double sided adhesive tape on top of the door to hold in place. Print on side. Print Settings Rafts: Not necessary Supports: Not necessary Resolution: 0.4 mm…
17MM ball mount for Tesla dash.
I liked the original model, but needed it to fit my monitor. Included the fusion 360 file where you can put your screen thickness in and generate the stand to fit. I've included the 17mm version which fits my screen. On my print I use 1mm…
Simply slip your g6 toy camera into this adapter and thread in a 17mm add on phone lens. Prints OK without supports.
Multiboard holder for smaller torque wrench, slit it 17mm wide to hold narrower wrenches.
52 teeth with an outer diameter 45 mm 14 teeth with an outer diameter 17 mm
I needed a place to mount an ipitaka MagSafe phone mount in my LC100, replaced a button blank with a tight fit mount M3 x 25mm bolt with locknut required to hold it together
This is a quick and dirty hook for shower slide bars of 17mm diameter. Not very pretty but a working solution. For other rod diameters you easily can resize it in your slicer software. Have fun!
GL-450 (X164) Phone Mount 17mm Ball Adapter
Bolt this up to any AMPS friendly bracket with four M4 countersunk bolts. Probably best to be printed out of PETG.
16, 17 and 18mm inner-diameter ring gauge. ring itself is 2mm thick. 3mm high. Thanks. Category: Rings
I created this model in order to be able to hang things from cabinet doors. It is nominally designed for doors with 16-17mm thickness. There are 2 variants. Variant 0deg : the door is clamped with using parallel elements. Can have some…
17mm Socket Wrench | Reinforced 3D Printable Tool (PETG / FDM) Strong 17 mm socket wrench designed for FDM 3D printing. Optimized for printers like the Creality Ender 3 Pro and similar machines. This model features reinforced longitudinal…
Spinogy ER25 Aufnahmen - Spannzange und Spannmutter Rego-Fix ER-Mini Ø 1 - 17mm Wandhalterungen Viel Spaß damit und folgt mir auf Insta Gruß Jörg Meister Woodworker
