Cable organiser for LASER sculpfun S30
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The cable and compressor pipe was not solved good by default. This solution improves cable grip at LASER head.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 150
- Makes
- 1
- Views
- 1,116
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The printed object can be easily clicked and also easily removed. Manufacturer uses a plastic tape.
It is recomended to use small 0.25mm nozzle. Object has fine details. I have tested 0.4mm nozzle and results were not so good.
Note 1.4.2024: Cableholder v2. has a little bit more stronger grips. Variable layer makes 3 times faster print. 0.1mm is used only for grips.
Note: Cable clip sometimes crack. It is possible not only to click it but also move to hole from down to up.
Note 25.10.2024: CableHolderSF3 v3. has cable clip 2mm heightened. Need to use supports.