CFD Verified Simple Blower Setup for Wanhao Duplicator 6
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wanaho Duplicator 6 Cooling Upgrade
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 233
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Required:
-2ea x Blowers 5015 (I choose the silent ones, but you should use the regular/fast ones for max cooling)
-1ea of each printed part in PETG or material of higher temp tolerance
-6ea x Small nylon zip ties ( I used 2mm wide x 145mm long, 2ea per blower and 2ea to tie the front and the back together)
-super glue or epoxy to glue the back duct together and the ducts to the blowers
-2ea x screws that be screwed into the aluminum block (1ea screw per mounting adapter)
Optional:
-Aluminum foil tape to the bottom of the ducts to they absorb less heat
Notes:
-Account for material shrinkage when printing. PETG shouldn't have significant shrinkage and can be printed at 100% scale.
-See photos for how it all goes together
-Heat block must be roated as shown in orange
Please consider buying me a coffee if you like my design! It's up to you of course.