1 / 8
Holder for jet gun - suitable for Kärcher K5.80 high-pressure cleaner — image 1
1 / 8

Holder for jet gun - suitable for Kärcher K5.80 high-pressure cleaner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The original jet gun holder of my high-pressure cleaner was broken, so I have designed a reinforced spare part.

Rating
5 / 5
Likes
18
Downloads
141
Makes
1
Views
1,689
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

The holder for the jet gun is printed with PETG.

Part list:

  • jet gun holder | quantity: 1
  • hexagon nut M3 | quantity: 1
  • cylinder screw M3x10 | quantity: 1
Print instruction:
  • Place the holder with the flat surface to the print bed (similar orientation as part is assembled). 
  • Print settings:
    • support: YES | organic
    • brim: YES | 6mm
    • enclosure: recommended to avoid warping 

Assemble instruction:

  1. remove brim and deburr edges if needed
  2. mount hexagon nut M3 to holder
  3. mount cylinder screw M3x10 with 3 turns
  4. insert holder to the rectangular cuts of the high-pressure cleaner and move holder to the left side
  5. tighten cylinder screw to block movement of the holder
  6. put jet gun to the holder

Tags