1 / 8
Holder for jet gun - suitable for Kärcher K5.80 high-pressure cleaner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original jet gun holder of my high-pressure cleaner was broken, so I have designed a reinforced spare part.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 141
- Wydruki
- 1
- Wyświetlenia
- 1689
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (17)Powiązane
The holder for the jet gun is printed with PETG.
Part list:
- jet gun holder | quantity: 1
- hexagon nut M3 | quantity: 1
- cylinder screw M3x10 | quantity: 1
Print instruction:
- Place the holder with the flat surface to the print bed (similar orientation as part is assembled).
- Print settings:
- support: YES | organic
- brim: YES | 6mm
- enclosure: recommended to avoid warping
Assemble instruction:
- remove brim and deburr edges if needed
- mount hexagon nut M3 to holder
- mount cylinder screw M3x10 with 3 turns
- insert holder to the rectangular cuts of the high-pressure cleaner and move holder to the left side
- tighten cylinder screw to block movement of the holder
- put jet gun to the holder