Gardena System Watering Hyperjet (High Flow, Far Throw)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A easy to print high flow Gardena jet with the best compromise between throwing far and maximum flow
- Rating
- 5 / 5
- Likes
- 69
- Downloads
- 453
- Makes
- 2
- Views
- 2,025
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
I always was curious about, whats the best compromise of the original gardena variable jet for maximum water flow, to minimize my time efffort for watering my garden.
So i tried many different designs by myself and after hours of testing this simplified far throwing high flow jet was born. With this jet the resistance is reduced to a minimum, the cross section is maxed out and the throw distance of the water is in my case around 10 meters maintaining a maximum throughput.
Print it with the jet tip on the build plate - the gardena coupling upwards. Very simple to print with any filament types. No support needed.
A pure high flow jet for Gardena System can be found in my other models.
You need a rubber o-ring for sealing (16mm outer diameter, 2.5mm ring thickness).
Have fun and post a make if it helped you save your time for watering! How far does your printed model throw? Should we start a throw distance challenge ?