1 / 4
Lamp shade for outdoor lamp (M62x1,5) — image 1
1 / 4

Lamp shade for outdoor lamp (M62x1,5)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The original lamp shade fall apart. To avoid such issue for the future, I have designed the lamp shade as a single part.

Rating
0 / 5
Likes
22
Downloads
53
Makes
0
Views
806
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

The lamp shade is printed with translucent PETG filament and contain a labyrinth seal instead of a rubber seal.

Print instruction:
  • supports: NO
  • layer height: 0,2mm (recommended)
  • nozzle diameter: 0,4mm or 0,6mm
  • brim: YES (recommended to ensure good adhesion on the print bed)
  • enclosure: recommended to avoid warping
Assembly instruction:
  1. remove brim and deburr edges if needed
  2. optional: grind the shade with fine sanding paper to smooth surface
  3. screw lamp shade to lamp
Manufacturer of the lamp:

Atlas-Einrichtungs-Einkauf-GmbH, part number: 0070698

Disclaimer:

Before starting to print the shade, ensure your lamp is a LED lamp and heat dissipation is low to avoid any dangerous situation due to printed plastic shade.

Tags