1 / 4
Lamp shade for outdoor lamp (M62x1,5) — zdjęcie 1
1 / 4

Lamp shade for outdoor lamp (M62x1,5)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The original lamp shade fall apart. To avoid such issue for the future, I have designed the lamp shade as a single part.

Ocena
0 / 5
Polubienia
22
Pobrania
53
Wydruki
0
Wyświetlenia
804
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The lamp shade is printed with translucent PETG filament and contain a labyrinth seal instead of a rubber seal.

Print instruction:
  • supports: NO
  • layer height: 0,2mm (recommended)
  • nozzle diameter: 0,4mm or 0,6mm
  • brim: YES (recommended to ensure good adhesion on the print bed)
  • enclosure: recommended to avoid warping
Assembly instruction:
  1. remove brim and deburr edges if needed
  2. optional: grind the shade with fine sanding paper to smooth surface
  3. screw lamp shade to lamp
Manufacturer of the lamp:

Atlas-Einrichtungs-Einkauf-GmbH, part number: 0070698

Disclaimer:

Before starting to print the shade, ensure your lamp is a LED lamp and heat dissipation is low to avoid any dangerous situation due to printed plastic shade.

Tagi