1 / 2
Fireworks at Night - Dual Lithophane Hueforge Print — image 1
1 / 2

Fireworks at Night - Dual Lithophane Hueforge Print

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This print is a really cool dual lithophane piece if you put a backlight behind it, or hold it up against a light.

Rating
0 / 5
Likes
5
Downloads
29
Makes
0
Views
261
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

Fireworks at Night - Dual Lithophane Hueforge Print

This print is a really, really cool dual lithophane piece. If you put a backlight behind it, or hold it up against a light, it will shine through the fireworks as if the print is coming to life.

Video here: https://imgur.com/7386cnX

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

  • PLA META Sunlu White Transmission Distance: 9.6
  • PLA Overture Cream (orange) Transmission Distance: 8.4
  • PLA META Sunlu Red Transmission Distance: 4
  • PLA+ Overture Dark Blue Transmission Distance: 1.8
  • PLA META Sunlu White Transmission Distance: 9.6
  • PLA Siddament Black Transmission Distance: 0.2

Swap Instructions:

  • Start with White
  • At layer #20 (0.96mm) swap to Cream (Orange)
  • At layer #31 (1.4mm) swap to Red
  • At layer #42 (1.84mm) swap to Dark Blue
  • At layer #48 (2.08mm) swap to White
  • At layer #49 (2.12mm) swap to Black for the rest.

 

Tags