Toothbrush Travel Case - Print in Place (the cutest one) v2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cute looking toothbrush case, which is printed in place. No rework necessary after printing. Only 8g PLA consumption.
- Rating
- 5 / 5
- Likes
- 48
- Downloads
- 339
- Makes
- 7
- Views
- 941
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Intro
Welcome! This is a very cute and stable looking travel case for toothbrushes.
It's printed in place with a hinge.
Print settings recommendation
Layer height: 0.2mm
Line width: 0.4mm
Cooling: 40-80%
Minimum layer time: 5s
Speed: 40mm/s
PLA should be sufficient and easiest to print, but you can try other filament types too.
This case is designed to fit tight, the hinge as well as the closure. Be sure to have your clearing tolerances dialed in perfectly! If not, try to increase cooling to 100%.
This version now has heart shaped openings allowing the toothbrush to dry after putting it into the case. Look into my other models if you want this case without openings.
Please post a make, if you're satisfied with this model.