Aqara Wireless Mini Switch Wall Mount Face Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A face plate designed to mount Aqara's Mini Switch in place of a standard light switch.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 101
- Makes
- 0
- Views
- 621
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Aqara Wireless Mini Switch Wall Mount Face Plate! This is a face plate designed to wall mount a single Aqara wireless mini switch in place of a standard light switch. This can be installed on any 1-gang wall box, as the screw spacing and backside protrusions were designed to fit in any standard North American single gang box.
Printing
For my prints, I used a Prusa MK4 and PrusaSlicer. I used Polyterra's Matte White PLA. Print face down, 0.15mm Quality, 0.4mm nozzle, supports on build plate only, 15% infill. about 2 hour print time. Alternatively, you can print with input shaping, 0.2mm speed, for about 50 minute print time.
Installation
WARNING: Working with electricity is dangerous, proceed at your own risk!
Remove support material. Press the Aqara Mini Switch into the wall mount face plate. It is a friction fit. Remove the old face plate and light switch you are replacing from the wall. Securely cap any wires. Install the new face plate. Done!