Clips for TP-Link POE Switch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of @Ethusiast's shelf clip to hold a smaller network switch.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 248
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Printed in PLA at 0.2mm layer height, 30% infill, and no supports. Note that the attached Gcode file is for a 0.6mm nozzle. The Openscad code is below in case you have a different size switch:
// Clip for Structured Media Cabinet shelf for TP Link POE LAN switch
// Import original file
translate([3.13,-22,-116.3])
import("C:\\Users\\<username>\\Desktop\\3D Printing\\clip_v0.stl");
// Create addition stop for narrower switch
translate([0.1,-47+28,-0.0]) // The +28 is the width in mm of the opening
difference(){
translate([3.13,-22,-116.3])
import("C:\\Users\\<username>\\Desktop\\3D Printing\\clip_v0.stl");
translate([-0.1,-1,-1])
cube([10,70,20]);
translate([-20,0,-1])
cube(20);
}
// fill a part of the logo under the stop
translate([0,36,0])
cube([2,10,12]);