Print In Place Bearings with Tolerance Calibration
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
608 like Bearings with tolerance calibration. Can be printed directly in place. Featuring optimization software.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 138
- Makes
- 1
- Views
- 1,008
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Problems with other 3D printed bearings like “no cage” or “too loose”?
Just print these, they are easy to print and after a few test prints, you have a good fit.
Dimensions
- Outer Diameter: 22 mm
- Inner Diameter: 8 mm
- Height: 7 mm
Tolerances
To achieve higher tolerances, I used the same techniques as Matvey Kukuy in his Ultimate 608 Bearing with Calibration Kit V2. Basically you have to optimize two variables, in this case:
- Horizontal Tolerances (HT)
- Vertical Tolerances (VT)
The values can be found in the Filename (608-BEARING-HT-VT). For the optimization, a binary search algorithm can be used. Please refer for this to Matveys Kit, I got it from his site, so I don't want to take the praise for it.
If the calculation is too tiresome for you, I (and ChatGPT ;) ) wrote a graphical program for this specific use case. The executable and source code can be found on GitHub.
Print Instructions
- Print one at a time (otherwise smaller defects might form and increase tolerances)
- I printed mine with 0.1 mm layer height, higher might also work
If you want other sizes, just request them, I have an easy creation workflow now.