Voron Trident A Drive Umbilical Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits a 16-cable umbilical and a shielded usb cable. Designed to mount to a Voron Trident A drive.
- Rating
- 4.667 / 5
- Likes
- 103
- Downloads
- 572
- Makes
- 4
- Views
- 3,792
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
I designed this simple mod to hold and protect the umbilical cable I run to my Voron Trident toolhead. This guides the wires down through the slot in the A-Drive so that they can be safely routed to the electronic bay at the bottom.
The two halves are already oriented for printing. Use a minimum of 3 walls and 20% infill for a 0.4mm linewidth. 2 walls are OK for 0.5mm+ linewidths. Add m3 inserts to the cavities in the smaller part, and use m3x16 bhcs to attach the halves together. It can be mounted to the A drive with another m3 bhcs/shcs.