1 / 4
[UPGRADED] Mars 4 (DLP/Max) build plate drip mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use it to further drain resin on the print post-print. Based on FergyMcFerguson's model with compatibility upgrades.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 332
- Makes
- 4
- Views
- 1,148
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My print settings:
Material: PETG
Infill: Cubic
Infill density: 40%
Perimeters: 3
Layer height: 0.2mm
Bottom layers: 4
Top layers: 4
Top and bottom infill pattern: Monotonic
Make sure your printer is fully calibrated as the tolerance is only ~0.1mm.
I recommend slicing and printing the hole section and half the length of the column to test fit before printing the whole part as one.
Give me a LIKE if you find this helpful! It is much appreciated!