1 / 10
Key Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Always fishing for your keys or other small items? You may want to check this out.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 140
- Makes
- 1
- Views
- 622
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Suggested print settings for PLA:
- Layer height 0.2mm.
- Infill 50%.
- Perimeters: 5 (for strength).
- No supports needed.
- Optional: Enable Ironing (for better surface results)
- Flow Rate: 15% (default).
- Spacing between ironing passes: 0.1mm (default).
- Ironing Type: All top surfaces (default).
Suggested print settings for PETG:
- Layer height 0.2mm.
- Infill 50%.
- Perimeters: 5 (for strength).
- Brim Width: 3mm.
- Brim Separation Gap: 0.6mm.
- No supports needed.
- Optional: Enable Ironing (for better surface results)
- Flow Rate: 15% (default).
- Spacing between ironing passes: 0.1mm (default).
- Ironing Type: All top surfaces (default).
Explore other backpack accessories HERE.
NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.