Magnetic Blackboard Chalk-Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A magnetic holder for blackboards that fits 2 packs of Jolly brand chalk packets.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 31
- Makes
- 0
- Views
- 235
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A magnetic holder for blackboards that fits 2 packs of Jolly brand chalk packets.
Can be easily modified to fit other objects i.e. whiteboard markers or whatever you need to hold on a magnetic surface.
In my case the packets were roughly 53x83x22 mm in size.
This design uses 9 magnets that are 5mm in diameter and 3mm thick.
Depending on the wieght you want to hold with it your number of needed magnets may vary. For me 9 magnets hold up the 270g alright.
The magnets are inserted in cavities that have a 0.6mm thick top and bottom, so you have to pause the print just before the cavities are closed which for me with a 0.2mm layer height was at layer 37 (see picture).
I printed the model lying on the side of the magnets, which means it needs supports but makes the insertion of the magnets easy.
! Keep in mind to remove the supports in the magnets' cavities !
Printed on my Bambu Lab P1S in eSun matte black PLA
Print settings:
0.4mm nozzle
0.2mm layer height
3 top/bottom layers
2 wall loops
15% infill