1 / 6
Curtain rod holder system for 1"(One Inch) Rods — image 1
1 / 6

Curtain rod holder system for 1"(One Inch) Rods

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a Curtain rod Holder system I designed in Fusion 360. It is designed to fit 1-inch Outer diameter curtain rods.

Rating
5 / 5
Likes
13
Downloads
143
Makes
1
Views
564
Reviews
1

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial

This is a Curtain rod Holder system I designed in Fusion 360. It is designed to fit 1-inch Outer diameter curtain rods. 

I have been using these holders for several years in my home mostly without any issues. I recommend printing these with a minimum of 5 walls and 30% infill for better strength(remember more doesn't hurt). There have been occasions of them breaking during the curtains-changing process but that could mostly be attributed to improper handling. If you decide to use this system, make sure to print sufficient spares. I know the printing orientation isn't the best for the strength. But this is what I could come up with while making it look visually pleasing. It's strong enough for intended application as long as you don't put much load on your curtains(Pulling etc)

I have also included hole patterns for making/marking holes. 

 

There are two types of holders. 

Normal holders-For installing curtain rods on the same wall.

Axial holder-For installing the other end of the curtain rod in the opposite wall.  

Tags