LCD Cover MK3S+
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.36 – €4.11 net (excluding VAT)
For file: LCD_Cover_MK3S+_0.2mm_PETG_MK3S+_4h3m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.73 excluding VAT (range midpoint).
- Weight reported by the author
- 43 g
- Print time reported by the author
- 4.05 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
With model name and small window (80mm)
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 181
- Makes
- 2
- Views
- 1,010
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
English:
LCD Cover for MK3S+ with model name. I made some additionally adjustments, which the MK3S+ original cover also has:
- Resize the window from 85mm to 80mm
- Made the back 0.7mm thicker
- Redesigned the bevel of the front
Do to after printing:
- The marked areas must be removed with needle-nosed pliers or similar
Deutsch:
LCD Abdeckung für den MK3S+ mit Modelbezeichnung. Zusätzlich habe ich noch einige Anpassungen vorgenommen, die auch das MK3S+ original Cover hat:
- Größe des Sichtfenster von 85mm auf 80mm angepasst
- Rückseite um 0,7mm dicker gemacht
- Die Fase der Front neu gestaltet
Nach dem Druck:
- Die markierten Stellen müssen mit einer Spitzzange (oder Ähnlichem) entfernt werden