Qidi X-Max3 Side Mount Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Side mount spool holder that mounts to the handle of the X-Max. No modification to the printer required.
- Rating
- 4.833 / 5
- Likes
- 101
- Downloads
- 1,087
- Makes
- 8
- Views
- 4,630
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Spool holder clamps to handle of the X-Max3. Allows use of Qidi drybox or a regular spool. 2x M3 x 50mm fasteners are required for the clamps. These are the same as the fasteners you likely removed from the printer during the installation process.
You will need the following:
- 1 Qidi X-Max3 Spool Holder
- 2 Spool Clamp R2
- 2 M3 x 50mm fasteners
- 1 4mm tube fitting with 1/8" pipe threads (optional)
After you print the spool holder you will need to remove 2 bridges that are circled in the photo. You will not be able to get the Qidi spool support rod installed without doing this.
I printed the spool holder in PLA and the clamps in PETG with 5 walls but i'm sure you could use PLA for everything.