1 / 3
Voron V0.2 Rear Panel with 8010 MCU fan
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quiter operation, as the bigger fan pushes enough air on lower speeds
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 228
- Makes
- 4
- Views
- 1,480
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Just wanted a quieter printer, when it is idle. The Pi gets hot on it's own and needs some cooling, so I designed this back for a larger fan. You can connect it directly in place of the old one.
BOM:
- The fan is 8010,
- mounted with 4 voron-standart heat set inserts (M3x4x5)
- and 4 M3x10 screws
There is an alternative version, if you want to have the fan visible or a tad less color contrast.