Ender 3 2020 Y Axis Extrusion Stiffening Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple bracket to help stiffen the 2020 Y axis extrusion of the printer.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 36
- Makes
- 0
- Views
- 451
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- Still working on my Y axis, I'll probably come out with a better solution in the near future -
Similar to the angled brackets one can buy from places like Aliexpress, but adapted to secure the Y axis 2020 extrusion to the main 4040 extrusion of the printer's frame.
With both brackets installed, although the Y axis deflection is reduced, it's not entirely eliminated.
There are 2 versions available: one that mounts to the front of the printer and allows the LCD ribbon cable to pass behind it, without crushing it and a second one without that extra clearance. Both should be printed standing up, at a 45 degree angle, for optimum strength.
To mount each one, you'll need two (2) M5 x 10 bolts, as well as two (2) M5 T-nuts/hammer nuts.
P.S.: Yes, my printer desk is very dusty indeed.